สกรีนเสื้อ Before you start this, you’ll need to collect a couple of things. Fortunately, this is a very basic DIY project
Posted on พฤศจิกายน 27, 2016 at 9:20 pm by ผู้หญิง เครื่องประดับ
Before you begin this, you’ll need to collect a few points. Thankfully, this is a very simple DIY task. All you’ll require is a t-shirt as well as some scissors! Potentially a safety pin or 2, yet we’ll review that later.
Be wary of just what material your tee shirt is, as it could battle royal. Try to adhere to cotton and also polyester … Microsuede does not fray either, but you most likely do not have many microsuede tee shirts.
Action 1: Cut Strips
Prior to you can even think about weaving, you have to reduce some strips. Basically, make parallel cuts regarding an inch aside from each other down the side of the t shirt. I suggest making the cuts flat, for optimum material curl-age. Diagonal and also vertical cuts tend to simply lay flat and also act strange.
You could make it all the same size, or differ sizes (as imagined listed below). As soon as you’ve reduced your wanted amount of strips, stretch that junk out so the fabric starts to crinkle. This will make the edges look a lot more uniform and clean.
Differ the widths of your strips as you see fit! Get creative.
Step 2: Weaving Patterns
The amazing feature of weaving is that it appears like it’s truly made complex as well as takes an enormous quantity of talent … The reality is, any type of old bum with 2 fingers might do it. Once you learn the pattern, whatever pattern you choose, you just maintain repeating it down your strips.
Ladder weaving is probably one of the most common kind of weaving, and also it’s really rather easy to do. Although it is simple, if I tried to describe it in words it would certainly be also complex. Here’s a work of art I developed on paint specificing the fundamental ladder weaving pattern:
This next technique is strikingly similar to ladder weaving, with one added action. When you reach part 3 of the infographic over, twist the bottom of the “blue” strip to create a loop. Then, when you reach part 4, draw the “red” strip with the loophole of the “blue” strip. Repeat!
In case that was unbelievably complicated, let’s go back to my killer paint skills to show the magic of the chain.
Action 3: Connect it Off
You’ve reached safeguard the last strip to make sure that your effort does not decipher prior to your eyes. In order to do this, cut the last loop/strip in half, and then tie each end to the strip above. Double knots are your close friends!
If you don’t want to reduce the strip, you could likewise simply safety pin it down, or connect the last 2 strips together with a ribbon.
Combine Weaving Approaches
If you wish to jazz up your t-shirt even more, try integrating weaving methods! Cut your strips additional vast, and also utilize the ladder weaving technique. After that, you could come back via and use the chain weaving technique. It’ll wind up looking something such as this:
Even one of the most complex-looking woven t-shirts are quite easy making. Simply by combining both styles of weaving, and even repeating one style, you could end up with some incredible designs. The instance to the right uses only ladder weaving, duplicated four times.
So, grab some t-shirts! Obtain innovative and start weaving. It actually is that straightforward – cut, stretch, weave, secure!